P E A R L   E C H 0   U S E R   G U I D E  

1.  Make sure only Windows is running; close all other applications 

especially disk utilities and virus protection software. 

 The Pearl Echo 

2. Login 

with 

Administrator privileges. 

Workstation agent 

3. 

Run setup.exe from the installation media.  

can be installed as 

a service on 

4. 

Click Workstation Setup. 

Microsoft 

5.  When prompted, enter the Pearl Echo  Server  IP  address  or  Fully 

Exchange Server. 

Qualified Domain Name (FQDN) and the Port number you assigned when 

installing the Pearl Echo Server software.  

6. 

If the machine will roam outside of your private network, enter the 

Public IP or FQDN of your Pearl Echo Server.  Otherwise, leave the Public 

IP or FQDN blank. 

7. 

Select an Open or Closed configuration.   

8.  The workstation will perform a test communication with the Pearl Echo 

Service and will display the results. If a link is successfully established, 

your Echo workstation installation is complete.  

Tip #1: You can automate the Echo Workstation deployment using the 

Windows Installer Service files provided with your installation media.  

Tip #2: If your users roam outside of your private network, you will need to 

enable the Pearl Echo Workstation agent to make a connection through your 

network firewall.   

Tip #3: You can install the Pearl Echo Workstation software on Exchange 

Server to monitor Microsoft Exchange E mail.  When installing the Pearl Echo 

Workstation software on Exchange Server, select  Options  and  This Machine 

is an Exchange Server .  

4